A bandsaw is one of the world’s most versatile power saws that is underrated by many woodworkers. In fact, it is rarely the first stationary power tool that people purchase for their workshops. However, it is an essential power tool that all woodworkers must own. A bandsaw is a scaled-down version of sawmills that can be a game-changer if used skillfully.
This high-quality power saw can be used principally in lumbering, metalworking, and woodworking. With the right blade, a bandsaw can cut a wide range of materials. Therefore, if you are planning on setting up your workshop, a bandsaw should be the first power tool you purchase. A bandsaw can be the only power saw you need to complete some projects.
These saws are made up of two wheels (a lower and an upper one) that turn a continuous blade, hence their name ‘’bandsaw’’. The significant advantage a bandsaw has over other saws is that its blade moves towards one direction. This movement minimizes stock vibration when cutting and also pushes the dust downwards. Some of the primary uses of bandsaw include:
Top Uses of Bandsaws
1. Cutting Straight Line
Making a straight cut is actually a straightforward task that any woodworker can do with this saw. And considering that a bandsaw the easiest power saw to maneuver, this should be quite simple. To make straight cuts, you should start by marking the cut line on your workpiece. Use a marker or pencil to draw your cut line and make sure it is straight using a measuring tape.
Making accurate cuts depend on how shaky your hands are? Therefore, hold the workpiece firmly and make your cut along the marked line. If your hands are too shaky, you can use the saw’s fence. A bandsaw’s fence can help guide your workpiece and make sure you get an accurate straight cut. The fence can help a newbie make precise straight cuts.
2. Cutting Circles and Curves
Cutting circles and curves is actually one of the most common functions of a bandsaw. Compared by Woodwork Nation, a bandsaw is the best power saw for making curved cuts and circles. Unlike jigsaws, a good quality bandsaw for woodworking can give you more control when making your curved cuts and circles. That is because you will be directing and feeding your workpiece to the blade using both hands.
When making tight curves, you should use a narrow blade with several teeth for fine finishing. The best blade for making tight curves should have at least 14 teeth per inch.
For perfect and matching curves, you can stack all your boards together and work on them simultaneously. And since the cutting length of this tool can be adjusted, making curved cuts with a bandsaw can be quite easy.
However, the probability of bending your blade when making tighter curves can be quite high. So, when tackling sharp curves, you should start by making relief cuts. Begin the relief cut from the wasteful part of your workpiece and make a straight cut to the line and then pull the saw out the same way.
Relief cuts will help free your blade when making sharp turns and make it simple for you to work. The relief cuts will remind you where you need to stop and then take care of the sharp corner piece by piece. The relief cut will make sure that your blade doesn’t bind or get stuck.
3. Making Bent Laminations
Lamination is a unique woodworking method, where you can create any curve from numerous thin pieces of wood. These thin strips of lumber are usually glued together over the curved place. Bent laminations can be a perfect way to improve your design, just like veneer. With a bandsaw, you can cut the small strips that you will use to create the curve.
Re-sawing is another common use of band saws. Re-sawing refers to cutting a thick board along its width to create some thin pieces. Re-sawing can help any woodworker make more products out of limited resources. Re-sawing creates matching pieces of wood that can improve the overall look of your furniture. These two pieces of wood created from a thicker piece can be used to generate a mirror-effect.
5. Making Veneer
Working with thick veneers can open up your design into numerous new possibilities. You can cut your thick board into multiple thin slices of veneers that can be used as matching pieces for a set of curved doors or drawers. Bandsaws can create several pieces of veneers that can be used to cover several small imperfections on any underlying surface.
6. Process Small Logs
Bandsaws can be used as mini-mills for processing small pieces of logs. A band saw can help you cut the large pieces of log in your backyard into smaller ones. You can use the small piece of logs to decorate your house. A bandsaw can help you make curved cuts; therefore, you can create several uniquely shaped pieces of logs that can be used all over your home.
7. Cutting Metal
Bandsaws are versatile power saws that can cut a wide range of materials, and this includes metal. In fact, cutting metal is one of the main reasons why you should purchase a bandsaw. Other than working on your pieces of wood, this saw can slice several pieces of metal. However, with metal, the cut won’t be as precise as when cutting pieces of wood. A bandsaw can only cut thin pieces of metal, so avoid cutting thick pieces of metal using a bandsaw. And make sure you always use the right blade when cutting metal.
Bandsaws are versatile power tools that can cut a wide range of material. This power tool can make numerous cuts ranging from straight to curved cuts. And in some cases, this is the only power saw an experienced woodworker needs to complete a project. However, make sure you set the right blade tension before you start making your cuts. The blade tension varies with the type of material you are cutting. Blade tension also depends on the type of cut and size of your workpiece. Another setting that you must alter depending on the type of material is the cutting speed. You cannot make different cuts while maintaining the same speed.